halaman

Pencarian

Selasa, 05 September 2017

BST203-C Piezo Electromagnetic Injector tester

BST203-C Piezo and Electromagnetic Common Rail Injector Tester


BST203-C piezo and electromagnetic
Supporting all common rail injectors testing including piezo type and electromagnetic type.
Can recognise type of common rail injectors








Introduction of BST203-C piezo and electromagnetic common rail injector tester:

1. BST203-C can test common rail injectors including:
denso electromagnetic common rail injectors
bosch electromagnetic common rail injectors
delphi electromagnetic common rail injectors
bosch piezo common rail injectors
delphi piezo common rail injectors
siemens piezo common rail injectors
continental piezo common rail injectors.


2. BST203-C can test common rail injectors quality, injectors openning, injectors atomization and injectors work.
3. BST203-C uses big LCD color screen
4. Fn button of BST203-C tester can identify type of common rail injector, is used to check if customers connect injector with BST203-C tester right or not, if connect wrongly, it can damage electrical board of BST203-C tester.

5. BST203-C has 4 basic testing models.
Customers can adjust frequency and width pulse based on the 4 testing models.
Model 1: width pulse 0120 uS, frequency 0008 Hz
Model 2: width pulse 0800 uS, frequency 0008 Hz
Model 3: width pulse 0700 uS, frequency 0020 Hz
Model 4: width pulse 0300 uS, frequency 0060 Hz (full load)

6. BST203-C can be set counter and injection time

BST203-C has counter/time button on the key button.
If customers need to set injection time when testing, they can touch counter/time button to set time, and then touch + or - button to increase or decrease injection time.
If customers need to set count, they can touch counter/time button again to set count, and then touch + or - button to increase or decrease count of injection.
If customers do not need to set count and injection time, they can test injectors under limited count.

7. BST203-C designs two connectors.
3pin connector is used to connect with piezo injectors, 2pin connector is used to connect with electromagnetic common rail injectors.
And BST203-C tester can recognise if injector is piezo type or electromagnetic type. If customers connect wrongly, connect electromagnetic injector with piezo connector (3 pin), after customers touch Fn button, LCD displays piezo injector erro. But if connect right, connect piezo injector with piezo connector (3pin), after customers touch Fn button, LCD displays piezo injector right.

8. Customers can adjust frequency or width pulse to test common rail injectors
Customers touch buton of INJ to select model of injector, touch button of MODEL to select basic testing model, touch button of COUNTER/TIME to set injection time or count, and then touch START/STOP button to start to test injector, and select to increase or decrease frequency or width pulse during testing.

9. BST203-C can work with nozzle tester to test atomization of injection

10. BST203-C can work with ultrasonic bath to clean injectors.

11. BST203-C can start injection, test high pressure of injection of all kinds of injectors.

12. BST203-C can adjust driving signal of frequency or width pulse of injection conveniently, has driving signal wave from that completely consistent of ECU. Product has passed electromagnetic and piezoelectric compatibility test like high and low temperature, static shock, probability of failure very low.

13. BST203-C has protection of short circuit, provide driving signal transfer line of all kinds of injectors.

14. BST203-C has two indicator lights, one is for piezo, another one is for electromagnetic injectors.
It is easy for customers to judge problem of injectors according to flash of indicator light.

15. BST203-C is a high voltage product. 
Please do not take apart of BST203-C, and please use it carefully.

16. Parameters of BST203-C

Weight of BST203-C: 6kg/set
Size of BST203-C: 14*32.5*28.5CM
Weight of BST203-C after packing: 7.5kg/set
Size of packing box: 37*31*23CM
17. We supply operation manual in English, Russian, Spanish, French or Portuguese and operation video in CD with product.

18. We supply a SD card has distributors' logo and contacting info. Welcome to become BST distributors

19. Contents
One 220V standard power cable (if customers need 110V/60Hz, please note when order)
One 3 pin piezo injector connecting cable
One 2 pin electromagnetic injector connecting cable
One piezo injector fly wire
Four fly wires
One BST203-C tester
One SD card has distributors' logo and contacting info
One CD has manual and operation video
One manual paper in English


 BST203-C piezo and electromagnetic common rail injector tester
1. BST203-C can test common rail injectors including
2. BST203-C uses LCD color screen
3. BST203-C has 4 basic testing models
4. BST203-C can be set injection count and time
5. Customers can adjust frequency or width pulse
6. BST203-C has two connectors
7. Touch Fn button to check if connect injector right or not. If connect wrongly, it will damage electrical board of BST203-C tester.
8. All connecting wires
9. Operation manuals.


Agus Yulianto
Perum Puri Astapada Indah 2 Blok K No:6 Plosogeneng
Kec .Jombang, Kab.Jombang, Jawa Timur 61416 Indonesia

Alamat Lokasi toko/rumah Google map
https://goo.gl/maps/7NZ4HMSYvvJ2

Hp.  0813-3278-7811 Kantor  0321-852845

Web  :
www.obd2jatim.com

Blog  :
http://obd2murah.blogspot.com
http://Toolsteknik.blogspot.com

Tokopedia
https://www.tokopedia.com/obd2

Bukalapak
https://www.bukalapak.com/agusyulianto

Facebook Agus Yuli Obd Jatim
https://www.facebook.com/obd99

0 komentar:

Posting Komentar

Catatan: Hanya anggota dari blog ini yang dapat mengirim komentar.

 
Design by http://agusyulianto2.blogspot.com/ | Bloggerized by Agus Y